Environment: DOS mode
Tool: socflash (Double click below socflash v1.22.07 icon to get the socflash tool)
Steps:
1. Copy the socflash program to USB flash drive.
2. Copy the BMC firmware in same directory with the socflash program.
3. Booting to DOS environment and execute command “socflash.exe if={bmc_image_file.ima}” to flash the BMC firmware.
4. Reboot the system when BMC FW flashing process finished.
Example:
Note: FW flashing process will take a few minutes. Please wait until the process done.
Please restart the system and boot in to the BIOS SETUP to check the BMC FW version when processes finished.
