How to update the BMC FW locally in DOS?

Environment: DOS mode

Tool: socflash (Double click below socflash v1.22.07 icon to get the socflash tool)



1. Copy the socflash program to USB flash drive.
2. Copy the BMC firmware in same directory with the socflash program.
3. Booting to DOS environment and execute command “socflash.exe if={bmc_image_file.ima}” to flash the BMC firmware.
4. Reboot the system when BMC FW flashing process finished.


Note: FW flashing process will take a few minutes. Please wait until the process done.

Please restart the system and boot in to the BIOS SETUP to check the BMC FW version when processes finished.

© 2022 ASRock Rack Inc. All rights reserved. | Information published on is subject to change without notice.